Crestron DM-RMC-200-S, Руководство по эксплуатации и установке

Страница: 20 / 44

DigitalMedia 8G Fiber Receiver 200 Crestron DM-RMC-200-S/S2
DM-RMC-200-S/DM-RMC-200-S2 Connectors, Controls & Indicators (Rear Panel)
20
19
21
22
Connectors, Controls & Indicators
#
CONNECTORS
1
,
CONTROLS &
INDICATORS
DESCRIPTION
1 PWR LED (1) Green LED, indicates operating
power supplied from local power pack
2 DM LINK LED (1) Green LED, indicates DM link status
3 VIDEO LED (1) Green LED, indicates video signal
presence and lock status
4 USB HID LED (1) Green LED, indicates a valid device
connection and activity on the USB HID
port
5 SETUP
(LED and Button)
(1) Red LED and (1) miniature recessed
push button for Ethernet setup
6 RESET
(1) Miniature recessed push button for
hardware reset
7 AUDIO OUT R, L
(Speaker)
2
(2) 2-pin 5 mm detachable terminal
blocks;
Left and right speaker level audio
outputs;
Paralleled with rear panel
AUDIO OUT
connectors;
Wire Size: Connector accepts 12 AWG
maximum;
Output Power: 15 watts per channel at
8 ohms
(Continued on following page)
14

DigitalMedia 8G Fiber Receiver 200: DM-RMC-200-S/S2 Operations & Installation Guide – DOC. 7246B