Crestron DM-RMC-200-S, Руководство по эксплуатации и установке

Страница: 32 / 44

DigitalMedia 8G Fiber Receiver 200 Crestron DM-RMC-200-S/S2
Uploading and Upgrading
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
firmware) can be transferred to the device. In addition, the IP table of the device can
be configured.
Establishing Communication
Use Crestron Toolbox for communicating with the DM receiver; refer to the
Crestron Toolbox help file for details.
A PC running Crestron Toolbox communicates with the DM receiver in the
following ways:

Via a DM switcher using TCP/IP or USB communication. TCP/IP provides
a faster method of communication than USB.

Via the LAN port of the DM receiver using TCP/IP communication. In this
scenario, the DM receiver is used in a standalone configuration (i.e., a DM
switcher is not used).
Via DM Switcher TCP/IP Communication via DM Switcher
To establish TCP/IP communication between the PC and the DM receiver via the
DM switcher:
1. Establish communication between the PC and the DM switcher as described
in the latest version of the DigitalMedia Switchers Operations Guide
(Doc. 6755).
2. Use the Device Discovery Tool in Crestron Toolbox to find the IP address
of the DM receiver. The tool is available in Toolbox version 1.15.143 or
later.
26

DigitalMedia 8G Fiber Receiver 200: DM-RMC-200-S/S2 Operations & Installation Guide – DOC. 7246B