Crestron DIN-GWDL, Руководство по эксплуатации продукта

Страница: 28 / 40

28 • DIN-GWDL and DIN-GWDL-SPLTR Product Manual — Doc. 9096A
Test DMX 2 Output
Use DMX 2 to test all light fixtures connected to the DMX 2 output. DMX 2 stops the program,
ignores any network commands, and turns off all fixtures connected to the DMX 1 output by
setting all DMX 1 channels to 0. This also turns on (red) all fixtures connected to the DMX 2
output by setting all DMX 2 channels to 255.
l
Tap SELECT to set all channels on DMX 2 to 0 or 255 (off or red).
l
Hold SELECT to ramp all DMX 2 channels up or down.
Test All Fixtures (Varying Intensity)
Use ALL to test all connected light fixtures with varying intensity. ALL stops the program,
ignores any network commands, and turns on all connected fixtures.
l
Press and hold the SELECT button to reduce intensity at a rate of 20% per second (to a
minimum of 1%).
l
Press and hold the SELECT button again to increase intensity at a rate of 20% per second
(to a maximum of 100%).
l
Tap SELECT to turn all fixtures on and off.
Factory Reset
Press and hold RESET for five seconds to restore the DIN-GWDL to factory settings.