Crestron DigitalMedia DM-TX-300N, Руководство по эксплуатации

Страница: 8 / 44

DigitalMedia™ CAT & Fiber Transmitters 300N Crestron DM-TX-300N/-F
Embedded Device Control
The primary objective of every Crestron system is to enable precisely the control
desired for a seamless user experience. The DM-TX-300N/-F includes built-in IR,
RS-232 and Ethernet control ports to allow programmable control of the devices
connected to it. The DM-TX-300N/-F also provides an alternative to conventional
control methods by harnessing the CEC (Consumer Electronics Control) signal
embedded in HDMI. Through its connection to the control system, the
DM-TX-300N/-F provides a gateway for controlling the connected source device
right through the HDMI connection, potentially eliminating the need for any
dedicated control wires or IR probes.
Compact and Versatile
The DM-TX-300N/-F is designed to be placed on a shelf or mounted in an
equipment rack or lectern. It is compact enough to fit inside a presentation lectern or
beneath a table. An array of indicators on the front of the DM-TX-300N/-F provides
for easy setup and troubleshooting, verifying the status of connections and signal
activity at a glance. Advanced configuration is enabled through Crestron Toolbox
software.
A Digital Upgrade for Legacy Systems
The DM-TX-300N/-F also affords a perfect signal converter for integrating
DigitalMedia with analog-based systems like Crestron MPS, QuickMedia
®
and the
CEN-RGBHV Series (all sold separately). A simple HD15 VGA cable connected
between the output of an MPS system and the DVI-I input of the DM-TX-300N/-F
allows every RGB, component, S-video and composite video input on the MPS to be
converted to DigitalMedia*. Analog audio is converted similarly through a balanced
stereo audio cable. The DM-TX-300N/-F’s HDMI, DVI and S/PDIF inputs may also
be used to expand the input capabilities of the MPS system to handle digital AV
sources.
*
VGA (RGB) to DVI-A adapter included. (DVI-A plug fits in the DVI-I socket.) In addition to RGB,
the DVI-I input can accept component, composite and S-video signals via direct interface to Crestron
MPS Series products (sold separately) or through an appropriate adapter (not included). Input sync
detection is not provided for composite or S-video signal types through the DVI-I connection.
4
•
DigitalMedia™ CAT & Fiber Transmitters 300N: DM-TX-300N/-F Operations Guide – DOC. 6907D