Crestron DigitalMedia DM-TX-300N, Руководство по эксплуатации

Страница: 33 / 44

Crestron DM-TX-300N/-F DigitalMedia™ CAT & Fiber Transmitters 300N
C2Net Device, Slot 8 (DM-TX-300N-F Shown Using Ethernet Slot on Control System)
3. Additional DM-TX-300N/-F devices are assigned different IP ID numbers
as they are added.
4. If necessary, double click a device to open the “Device Settings” window
and change the IP ID, as shown in the following figure (DM-TX-300N
shown).
“Device Settings” Window (DM-TX-300N Shown)
5. The ID code specified in the SIMPL Windows program must match the IP
ID of each unit. Refer to “Identity Code” on page 19.
Program Manager Program Manager is the view where programmers “program” a Crestron control
system by assigning signals to symbols.
The symbol can be viewed by double clicking on the icon or dragging it into Detail
View . Each signal in the symbol is described in the SIMPL Windows help file ( F1 ).
Example Program
An example program for the DM-TX-300N/-F is available from the Crestron website
(
www.crestron.com/exampleprograms ).
Operations Guide – DOC. 6907D DigitalMedia™ CAT & Fiber Transmitters 300N: DM-TX-300N/-F
•
29