Crestron
CNX-BN12 & CNX-BF12
Numeric & Function Keypads
3. CNX update files are required for either CNMSX-AV/PRO or CNRACKX/-DP. Filenames
for CNX update files have a UPZ extension, and ST-CP files are in one EXE or zipped UPZ
file. To avoid program problems, make sure you are using the update file with the correct
suffix letter (e.g., S, V, W, X).
4. The depth of the Keypad is listed without the Cresnet connector (approximately 0.45 in)
plus
clearance for the wiring.
NOTE
: Crestron software and any files on the website are for
Authorized Crestron dealers only. New users may be required to register
to obtain access to certain areas of the site (including the FTP site).
Physical Description
Refer to the illustrations on pages 4, 5 and 6. The keypads come fully
assembled and each has 12 buttons with LED windows. The CNX-BN12
has a CLEAR button, an ENTER button, and numeric digit buttons 0
through 9. The CNX-BF12 has 6 source selector buttons, an ON/OFF
button, a MUTE button, device transport control and volume control
buttons. A kit with additional source buttons for the CNX-BF12 is also
provided (see illustration on page 5).
The removable faceplate and divider attach to the button unit once the
single gang detent plate is attached.
The button unit has a speaker and male port (standard Cresnet network
port labeled 24 Y Z G) on the back. The port provides operating power
and communications to/from the keypad.
Operations & Installation Guide - DOC. 8185
Number & Function Keypads: CNX-BN12 & CNX-BF12
•
3
