Crestron CEN-SWPOE-24, Руководство по эксплуатации, Страница: 24 / 32

24-Port Managed PoE Switch Crestron CEN-SWPOE-24
20
•
24-Port Managed PoE Switch: CEN-SWPOE-24 Operations Guide – DOC. 7036C
Configuration Backup It is possible to back up the file containing current configuration settings of the
switch to a computer’s hard drive. The default configuration filename is config.bin.
To back up current configuration settings, click the General selection and then click
the Firmware Tools subselection. The “Firmware Tools” screen opens.
Back up the current configuration as follows:
1. Click Back Up to open the “File Download” window.
2. Click Save to open the “Save As” window.
3. Navigate to the location on the hard drive to which the configuration file
should be saved.
4. (Optional) In the File name text box, enter a new file name if desired.
5. Click Save to open the “Download Complete” window and save the file.
6. When the download is complete, click Close.
Load the configuration file to any CEN-SWPOE-24 switch by performing the
configuration restore process discussed in “Configuration Restore” section on page
19.
Configuration Reset
(Factory Defaults) To restore factory default configuration settings of the switch, click the General
selection and then click the Firmware Tools subselection. The “Firmware Tools”
screen opens.
•
Click Reset to restore factory default settings.
•
Click Reset But Keep Network Settings to restore factory default settings
except the network settings.
NOTE: The switch restarts to allow the factory default settings to take
effect. After 15-20 seconds, the home screen opens so the settings can be
reviewed.