Crestron CEN-SWPOE-24, Руководство по эксплуатации, Страница: 14 / 32

24-Port Managed PoE Switch Crestron CEN-SWPOE-24
10
•
24-Port Managed PoE Switch: CEN-SWPOE-24 Operations Guide – DOC. 7036C
Configuration
Have a question or comment about Crestron software?
Answers to frequently asked questions (FAQs) can be viewed in the Online Help
section of the Crestron Web site. To post a question or view questions submitted to
Crestron’s True Blue Support, log in at
http://support.crestron.com . First-time users
must establish a user account.
The CEN-SWPOE-24 provides a Web-based configuration utility that can be
accessed from a Web browser or from the Crestron Toolbox

.
Accessing the Configuration Utility
NOTE: Configuration of the CEN-SWPOE-24 must be performed from a computer
whose IP address is in the same IP subnet. The default configuration of the switch
allows the IP address of the switch to be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server on the local area network.
If a DHCP server does not exist on the network and two minutes have elapsed since
the switch was powered on, the IP address of the switch defaults to 192.168.100.16
and the subnet mask defaults to 255.255.255.0.
The configuration utility can be accessed from a Web browser or from the Crestron
Toolbox:
•
The configuration utility can be accessed from a Web browser if the IP
address or host name of the switch is known.
NOTE: The default host name of the switch is “CEN-SWPOE-24.”
•
The configuration utility can be accessed from the Crestron Toolbox if the
switch is configured to operate in DHCP mode (default configuration). The
Crestron Toolbox automatically discovers the IP address of the switch. For
additional information, refer to “Using Crestron Toolbox” on page 11.
Using a Web Browser
To access the configuration utility from a Web browser:
1. Start the Web browser.
2. Go to the IP address or host name of the switch.
NOTE: If the default Web management port number of 80 has been
changed, append the port number to the IP address by entering a colon
followed by the new port number. If, for example, the IP address is
192.168.100.16 and the Web management port number has been changed
from 80 to 150, go to http://192.168.100.16:150.
When the user name and password window opens, log in to the switch. For
log-in information, refer to “Logging In to the Switch”, which starts on
page 11.