Crestron black nova AXES Series, Руководство пользователя

Страница: 14 / 17

AXES Crestron® Keypad Panels Manual – V1.1
Page 13 of 16
The default value is 500d
Analog input:
<
Sleep_Mode_Backlight >
Used for decreasing of the buttons backlight when the device is in the sleep mode.
The valid values range is from 0d [%] to 100d [%].
Out of range values are ignored.
The default value is 20d
Analog input:
<
Wait_for_Sleep >
The time in seconds after which the device is switching to the Sleep mode the
<
Sleep_Mode_Backlight > value applied for all button’s backlight
The valid values range is from 2d to 999d seconds.
Out of range values are ignored.
The default value is 20d
Analog output:
<
Temperature_Sensor_Output >
Indicates the room temperature measured by a built-in sensor [°C] multiplied by 10d.
Output values range is from 0d to 999d, that is equal to temperatures from 0.0°C to
99.9°C
Analog output:
<
Humidity_Sensor_Output >
The devices equipped with humidity sensor it indicates the sensed humidity in the room.
Output values range is from 0d [%] to 100d [%]
Analog input:
< Fan_Speed >
If a display is available it displays the fan speed
The valid values range is from 0d to 6d:
0d = OFF
1d = Speed 1
2d = Speed 2
3d = Speed 3
4d = Speed 4
5d = Speed 5
6d = AUTO speed
Out of range values are ignored.
The default value is 0d.
Analog input:
<
Mode_Selection >
If a display is available, it displays the selected mode.
The valid values range is from 0d to 4d:
0d = None (no mode displayed)
1d = Cool
2d = Heat
3d = Fan
4d = Auto
Out of range values are ignored.
The default value is 0d
Analog input:
<
Analog_Value >
The value to be shown on the display as an integer number.
It is visible on the screen when <
Display_Selection > is set to 3d.
The valid values range is from 0d to 999d.
The default value is 0d
Analog input:
< Percentage_Value >
The value to be shown on the display as an integer number.
It is visible on the screen when < Display_Selection > is set to 4d.
The valid values range is from 0d to 100d.
The default value is 0d
Analog input:
< Temperature_C >
The temperature value in degrees Celsius multiplied by 10 to be shown on the display.
It is visible on the screen when < Display_Selection > is set to 5d.
The valid values range is from 0d to 999d, that represents 0.0C...99.9C degrees.
The default value is 0d