manualshive.com logo in svg

Crest Audio Versarray Pro 112, Технические характеристики, Страница: 42 / 48

Поделиться
Скачать
Crest Audio Versarray Pro 112 Скачать руководство пользователя страница 42

42

Must use the proper search parameter (IP address) in order for the software to detect devices 

connected to the network.

Preset Files Available for Use

Ten On-board Presets

1. VR218_Nominal

2. VR218_BassBoost

3. VR215_Nominal

4. VR215_BassBoost

5. VR218_Nominal

6. VR218_BassBoost

7. VR215_Nominal

8. VR215_BassBoost

9. VR218_Nominal

10. VR218_BassBoost

These first ten Presets are loaded into the power amp DSP memory, and are accessed directly using 

the Section A 

Store

 and 

Recall

 functions. File versions are also stored in the PC software DSP GUI 

Preset folder.

NOTE:  The power amp DSP memory locations need to be loaded with an active working Preset file, 

or the DSP and power amp module would have no parameters loaded at all.  This situation of no 

parameters would entail no crossover, no EQ, no limiters, etc., and thus would not only fail to perform 

to specification, but could allow the powered speaker system to become damaged at high drive 

levels.  Therefore, with only two Factory Presets per Sub model, we loaded them into the memory 

locations that holds 10 Presets, in an alternating fashion.  Users can overwrite the other 8 repeated or 

irrelevant Presets with their own custom Presets once they have a particular venue or use defined.

The VR 218 and the VR 215 have very similar settings, but it is best to use the correct model 

Preset file for the model in use.  This provides for maximum performance from the VR 218, and 

maximum protection for the VR 215.

Preset files included in PC software DSP GUI 

Preset

 folder

(The following files are for the VR 112 Pro)

1. 2cabs_Straight-line   

(0 degrees angle between cabs)

2. 3cabs_Straight-line

3. 4cabs_Straight-line

4. 6cabs_Straight-line

5. 8cabs_Straight-line

6. 2Cabs_J-line_section   

(angles of 12.5 to 15 degrees)

7. 3Cabs_J-line_section

8. 4Cabs_J-line_section

9. LT_2Cabs_Mild_Angle  

(LT is Long Throw)

10. LT_3Cabs_Mild_Angle

11. LT_4Cabs_Mild_Angle

12. LT_6Cabs_Mild_Angle

13. LT_8Cabs_Mild_Angle

Содержание Versarray Pro 112

















































Отзывы:

Нет отзывов