manualshive.com logo in svg

Crest Audio Versarray Pro 112, Технические характеристики, Страница: 13 / 48

Поделиться
Скачать
Crest Audio Versarray Pro 112 Скачать руководство пользователя страница 13

13

Using the Versarray™ Pro 218 Sub User GUI Software

Once the Versarray™ Pro 218 Sub speaker system cabinets are turned on, connected via Ethernet, 

and connected to the PC with the Versarray™ Pro series User GUI software installed on it, it is time 

to start the GUI software.

NOTE: Just like most modern electronic devices, the Versarray™ Pro 218 Sub speaker system power amp electronics 

need to be operated within a certain temperature range.

This range is typically from 0 degrees Centigrade, to +70 degrees Centigrade for electronic components.  In order to avoid 

improper operation, do not turn the Versarray™ Pro 218 Sub speaker system power on until the units temperature has 

equalized close to that of the room, if it has been stored in a cold environment.  

1.  Run the Versarray™ Pro series User GUI software by clicking on the Desktop Icon (or from the 

Start Bar/All Programs).

2.  A Start Window will open up, and if it is not already, make it full screen.  See Fig.1

Fig.1

3. The functions for this Start Window are contained within the block in the upper left hand corner, 

see close-up below in Fig. 2 with numbered functions, full descriptions to follow later.  Note that the 

Device List Block (DØ) will not have any speaker systems loaded into it’s window until you have 

connected with one or more different VR Pro series speaker systems via the software.

Содержание Versarray Pro 112

















































Отзывы:

Нет отзывов