38
Fig. 17
Click Yes, as the default Preset “ VR218_Nominal” is also stored in the File folders for future use, as
needed.
3. A file manager window will come up with the File Folder contents for the Project files, located at:
For Windows 7 and for Windows XP - C:\Program Files (x86)\VR Series v1.2.X\Project
For Windows 10 - C:\Program Files\VR Series v1.2.X\Project. No (x86)
where C: is the root drive where the Versarray™ Pro series User GUI PC software has been located,
and “X” is the version of the software you have loaded onto the PC.
You must pick a previously saved Project file, as there are no supplied Factory Project files,
they
must be associated with the exact cabinets present on the network at the time of the Project
Save.
Let’s say you named a Project file “
Example-Sub
”
Highlight and Click “OPEN” on the
Example-Sub
Project file.
4. The “LAN Device Discovery” window will come up. See Fig. 18
Fig. 18
Click on “Yes”.
5. The Connect Device dialog window comes up, as shown in Fig. 19 .
Fig. 19
Click on “Load Current Settings to Device”
Once the settings have been loaded into the VR 218 speaker system, the Device List should now
show one or more of the units as “On-line”, See Fig. 5 in the previous section on Presets, where the
arrow points.