Creo Dolev 800V+, Руководство пользователя

Страница: 73 / 90

Preparing Exposure Strips 63
Data
Frequency
12.00 - 33.00 25.00 Enter the frequency used to transfer the data, for
example, 25.00.
SSP number
0 - 500 0 Enter
0
for the number of lines after which the plotter
performs
stop spiral
.
Resolution
30.00 -
200.00 100.00 Enter 1 resolution (in mm and equal in height and width)
per exposure, for example, 100.00. After you expose the
strip, repeat the entire procedure for each resolution.
Note: If you wish to use Half Resolution , set the Half Res
field (in exposure format in the Host) to Yes and begin the
exposure process from the beginning.
Height Offset
0 - 900 0 Enter the distance in height between the origin of the
imagesetter and the start of the strips exposure.
Width Offset
0 - 1180 0 Enter the distance in width between the origin of the
imagesetter and the start of the strips exposure.
Parameter Range Default Do the following...
Note: The film offset in height and width can be left at 0,0 .