Creo Dolev 800V+, Руководство пользователя

Страница: 47 / 90

Overview 37
During setup, the imagesetter cuts and ejects the first piece of media. This
is done since a small piece of media was exposed to light when the cassette
was carried from the darkroom.
The next step is to expose the media. You choose the file, the file resolution,
and layout (these topics are covered in the user guide of the relevant host
workstation).
The media is exposed and ejected. The ejected media is sent to the output
cassette, or to an optional inline processor.
The following figure shows the media path in the imagesetter.
Figure 11: Dolev 800V+/800V
2
/800V
3
media path (left-side view)
Film on
exposure
drum Film cutter
Small (12")
supply cassette
Film loading
mechanism
Large (33")
supply cassette
Output
cassette
Film
conveyor
Film roller
arms
Film guide
to conveyor
Film guides
to output
cassette
Note: Since the medium cassette is located to the right of the small cassette, it
is not seen in the figure.