ENGLISH
9
Settings page. An ASIO driver for >24-bit 192kHz high-resolution replay is not required if running Windows 10 OS. For that reason, using older OS
than Win 10 is not recommended.
Alternatively, using a streaming or network audio device with USB output, connect as above and if possible, control track selection from a re-
mote-control app on a phone or tablet.
USB input from Apple iOS
Plug a good quality printer type cable, USB A male to USB B male, from a spare port on your computer to the USB socket on the rear of the ampli-
fier. Avoid using cables longer than 5 metres as the i20 USB input may not work reliably.
Go to “Sound” settings. Voyage USB Audio 2.0 will show in the listing, along with any built-in speakers. Select Voyage USB 2.0 and it will direct
sound to this output. It may also inform you that the selected device has no output controls. In other words, the signal is not attenuated, and you
should use the volume control on the amplifier only.
Go to a preferred music app or network storage device on your desktop and play music as usual. Direct the output to the Voyage USB Audio 2.0.
The amplifier will convert the digital audio signal to analogue. Control the volume from the amplifier as usual.
Alternatively, using a streaming or network audio device with USB output, connect as above and if possible, control track selection from a re-
mote-control app on a phone or tablet.
CONFIGURING ANALOGUE INPUTS in the SETUP MENU
To enter the Setup Menu, Power-up the i20 from Standby mode by pressing either knob once. When the Creek logo shows, immediately press,
and hold, the left-hand knob until the display shows Setup Menu. Do this before the normal display screen shows or you will not be in the Setup
Menu.
The Setup Menu offers the following pre-amp gain options:
0dB, +3dB, +6dB, +9dB, +12dB and Power amp Direct.
For example: If you require 0dB on Line 1, +3dB on Line 2, 9dB on Line 3 and 12dB on Line 4, it can be changed easily in the Setup Menu. Select
the value you want and press the Volume knob to start the amplifier with those settings or go to the next input in turn to adjust the gain to suit
