Installing Your PC-DVD 5x Drive 8
4. Insert the PC-DVD drive into the
drive bay as shown.
You may want to connect the
cables as described below before
you insert the drive into the bay.
Then, feed the cables through the
bay as you insert the drive.
5. Connect a PC power cable to the
PC-DVD drive. The computer’s
power supply is usually located
in a rear corner; several power
cables extend from the box with
connectors available for internal
devices.
6. Connect the IDE data cable
to the PC-DVD drive.
Note: Align the colored
stripe on the IDE data cable
to pin 1 of the IDE data
connector..
7. Connect the audio cable to
the PC-DVD drive. Connect
the other end of the audio
cable to your audio card.
Power cable
Power In
connector
Pin1
Colored
stripe
IDE data
cable
IDE data
connector
Audio
cable
DVD5x.fm Page 8 Wednesday, January 20, 1999 11:01 AM
