PC-DVD 5X Drive 6
Rear Panel
Cables
Your PC-DVD 5x drive includes:
❑
Audio cable
❑
IDE data cable
Master
(default)
Slave
Master/Slave jumper
sets the PC-DVD drive as
master or slave when you
connect it to another
PC-DVD or CD-ROM drive.
Note:
Cable Select is
reserved and must not be
used.
Power In connector
connects an electrical
power cable from your PC
power supply to the drive.
Enhanced IDE Data connector
transfers data between the PC-DVD drive
and devices, such as your computer’s
hard disk and motherboard, when
connected by an IDE data cable.
CD Audio connector
sends audio from the PC-DVD
drive to the audio card when
connected by a CD audio cable
(or to the Dxr2 decoder card
when present).
Digital Audio connector
connects to a digital audio tape
(DAT) or professional audio
system for digital recording.
Note:
This connector follows
the EBU-IEC958 standard set
by the European Broadcast
Union (EBU).
Audio cable
IDE data cable
connects the PC-DVD drive to the
motherboard or IDE interface card.
DVD5x.fm Page 6 Wednesday, January 20, 1999 11:01 AM
