User Manual for Spot-Check Monitor
13
“%PI 4.1”:
mark and value of Perfusion index.
"
": heart beat icon.
"
": plethysmogram.
" ": pulse bar graph.
Operation procedure:
1. Connect the SpO
2
probe to the connector on the sensor connector.
2. When the device is powered on, insert one finger (index finger is preferred, the nail should be not
too long) into the clip of the probe.
3. Wait for 2 seconds, the device will auto begin to make measurement.
4. The measured result will be displayed on the screen, as shown in figure 4.4. If the host device is
connected to the device, then the measured result can be displayed on the screen of the host device
by running APP software.
5. Remove the finger, the prompt “Finger out!” pops on the screen .
Note: 1. PR and SpO
2
over-limit indication are available for the device (if the PR and SpO
2
options are
selected).
Содержание PC-101
Страница 1: ...Spot Check Monitor User Instruction Manual ...
Страница 33: ...User Manual for Spot Check Monitor 25 ...