Configuring BlasterBoard Hardware 1-9
J5(21,22): Power Button/
Suspend Switch
Connector
Attach the ATX Power Button cable to the J5 connector. When the system is off, push the power
button to turn the system on.
When the system is on, push the power button rapidly to switch the system to the Suspend mode,
and push and hold the button for more than four seconds to turn the system completely off.
When the system is in the Suspend mode, push the power button rapidly to turn the system on.
W_UP_LAN1: Wake On
LAN Connector
While in Suspend state, if an external LAN
signal is received, the system wakes up and can
be accessed with the LAN card.
Connectors
Attach system components and devices to the BlasterBoard via the connectors. A description
of these connector follows. See page 3 for the location of the connectors.
PWR1
LAN1
J5
Turn off the power before making
any connection to the board.
M009-1.fm Page 9 Wednesday, May 19, 1999 1:32 PM