manualshive.com logo in svg

Creative BlasterBoard 128 V2, Начало работы, Страница: 19 / 55

Поделиться
Скачать
Creative BlasterBoard 128 V2 Скачать руководство пользователя страница 19

1-8 Configuring BlasterBoard Hardware

ATX Functions

The BlasterBoard supports ATX power and ACPI functions.

Software Power-Off

Follow the steps below to use “Software Power-Off Control” in Windows 95/98.
1. Click the START button on the Windows 95/98 taskbar.

2. Select Shut Down The Computer to turn off the computer.  The message “It is now safe to 

turn off your computer” is not shown when using this function.

Modem Ring Power Up

If an external modem ring-up signal occurs while the computer is in the Soft-off/Suspend state, 
the system wakes up and can be remotely accessed.  Set the COM Ports option to Activity.

Alarm Wake Up

If you want the computer to boot at a certain time, set the Power Up by Alarm option to Enabled, 
and set the Alarm options in BIOS Setup.

Keyboard Power On

You can set a hot key to power on the system when it is pressed.  Enter BIOS Setup to set the 
KB Power On Function and set the Keyboard Power On jumper (see “J8: Keyboard Power On 
Selector” on page 1-7).

PWR1:  ATX Power 
Connector

Connect the ATX power supply to this connector to provide power for the BlasterBoard.

J7

J8

M009-1.fm  Page 8  Wednesday, May 19, 1999  1:32 PM

Содержание BlasterBoard 128 V2
























































Отзывы:

Нет отзывов