Installing Software in DOS/ Windows 3.1x 3-3
Using Memory Managers
To bypass loading of low-level device drivers
1. During system startup, press and hold down the <Alt> key
when the message “Starting MS-DOS...” appears.
2. Release the key only when you see the DOS prompt.
Alternatively, you can use MS-DOS 6.x’s multiple boot
sessions feature. Create a session with settings that load the
drivers into memory. If you do not want to load these drivers,
select another session without them at system bootup.
(Refer to your MS-DOS 6.x documentation for instructions on
how to create multiple boot sessions.)
To use a memory manager
❑
If you are using MS-DOS 6.x, run MEMMAKER.
(For details, refer to your MS-DOS 6.x documentation.)
❑
If you have a memory manager such as QEMM or 386MAX,
refer to their respective documentation for instructions.
This manual downloaded from http://www.manualowl.com