Creative Playthings Fun Deck Spiral Slide 63056-101 Скачать руководство пользователя страница 4

Страница: 4 / 8

AssEMbLy instructiOns

FuN DECK SPIRAL SLIDE
19755-100 Rev E (07-16)

page 4

stEp 7 - side supports

Locate the two Side Supports (J). Align the large hole at

the top of each Side Support with a hole drilled in the Wall

Support in a previous step. Make sure that the Side Supports

are plumb and parallel. Fasten each Side Support to the

Wall Support using one #10 x 2-1/2" Wood Screw through

the small holes at the top of the Side Support.
Fasten the bottom each Side Support to the Platform Support

using two #10 x 2-1/2" Wood Screws through the small holes

at the bottom of the Side Support. The space between the

Side Supports should be approximately 24".

Wall Support

stEp 8 - side Fillers

After installing the Side Supports and before installing the

Side Fillers, restore the Narrow Platform Board that was

removed in Step One.
Fasten a Side Filler (K) to each Side Support (J) using two

#10 x 2-1/2" Wood Screws through the holes provided. Make

sure that the inside edges of the Side Support and Side Filler

are even.

Содержание Fun Deck Spiral Slide 63056-101








