© Copyright 2018, Creative Playthings
CLARKDALE
19966-100 Rev A (04-20)
Page 2
ASSEMBLY INSTRUCTIONS
CLRKCP1 — Clarkdale 1
Dimensions of assembled package:
17' 6" wide x 14' 9" deep x 10' 5" tall
Cartons for this Play Set:
1 63098-111
Clarkdale Box 1
1 63083-352
Clayton Box 2
1 63083-353
Clayton Tent (Hdwre & Inst.)
1 8364-400
Scoop Slide 10ft.
1 63061-202
Swing Beam - 3 Pos Premium
1 63059-212
Beam Legs 7ft. (Hdwre & Inst.)
1 31820-102
Swing Mount
1 SH946-102 Access Ladder 5ft. - Premium
1 AA934-204 2 Swings, 1 Ring Trapeze
• The instructions found in 63083-353 give a complete descrip-
tion for assembling the play tower with the following excep-
tions:
• On step 11, the Swing Mount provided is different than the
Swing Mount shown in the manual. The counter-bored holes
in the Swing Mount should face the gym. Secure the bottom
of the Swing Mount using the 5/16 x 4-1/2" Hex Bolt Assem-
bly provided. The top hole will not align with the existing hole.
Use a 3/8" diameter drill to make a hole through the top sup-
port and secure using one 5/16 x 4-1/2" Hex Bolt Assembly.
(See illustration at right).
• Steps 20 & 21: Use the pre-assembled Access Ladder with
plastic steps.
• Proceed with assembly. On step 26 use the Deluxe Hand
Grips rather than the plastic handles.
• Use a Scoop Slide in step 27.
• Assemble the Swing Beam as shown in the instructions in
63059-212 and mount it to the tower.
• After installing the beam and securing the ground stakes,
check to assure all fasteners are secure.
• Hang the swings and trapeze.
