Rev 12-31-2018
OPERATION
Once the Pendant and Spikemark are communicating you are ready to go. Before you
Make It Move!
let's take a look at the Pendant buttons, levers and knobs:
STARTUP AND SHUTDOWN
The Pendant will power up as soon as it is plugged into an active Showstopper 3 Accessory port.
However it must be enabled every time Spikemark is started before it will be able to connect.
The Pendant menu within Spikemark has several options:
➔
Configure
◆
IP Address and Port configuration
➔
Get Pendant Log
◆
Downloads the log to your PC -
great for
troubleshooting!
➔
Update Pendant Firmware
◆
Firmware updates are executed from here
➔
Reboot Pendant
◆
The preferred reboot method
➔
Shutdown Pendant
◆
The preferred shut down method
➔
Enable Pendant
◆
Enabling the Pendant in Spikemark
Page 10 of 24
