Rev 12-31-2018
JOG TO A SPIKE
In addition to manual jog capabilities, the Pendant allows jogging to a specified Spike. These are the
same Spikes as in Spikemark. If the selected axis doesn't have any spikes set or if you have a Group
selected no spikes will be available. Keep in mind that jogging to a Spike utilizes the Default Speed
and Acel values in Spikemark for that axis. To jog to a Spike:
●
Select the axis
●
Select the Spike to move to - it will highlight RED
●
Press and hold the Enable button. The selected Spike will highlight GREEN
●
When the move is complete the Spike will highlight BLUE
●
Jogging to a Spike is only supported on individual axes
TECHNICAL SUPPORT
We strive to provide all the details required to operate and troubleshoot issues here. But if you are
stuck and getting frustrated have no fear, we are here to help! The best and quickest way to reach
us is via email:
. Someone is on call,
weekdays/evenings/showcall/weekends to get back to you quickly. We are also here to talk - call us
at 401-289-2942 x2. If we don't answer we'll call you back.
TROUBLESHOOTING
OPERATIONAL ISSUES
Page 17 of 24
