Creality CR-Laser Falcon, Руководство пользователя

Страница: 7 / 20

For the purpose of engraving or cutting with a laser engraving machine, allow the workpiece to be
exposed to the high-density laser beam emitted by the laser engraving machine. The workpiece may be
subject to gasification without combustion as it is pretty hot on the surface. On the other hand, most
workpieces are essentially combustible, which may be ignited, leading to an open flames and consequently to
the machine breakdown and environmental contamination.
1. It is prohibited to store the machine in areas close to combustible and explosive substances, volatile
solvents or source of heat. Instead, store it in a well-ventilated, cool and dust-free place;
2. Make sure that only the specific attached power cord rather than other similar power cords are used
during installation;
3. Clean the tripod and laser module with a dry cloth regularly when the power is off.
4. Ensure to run the laser at 0°C-35°C. Operation at sub-zero temperature is prohibited; It is prohibited to
run the machine under wet environment or in thunderstorm weather;
5. Switch off the machine if it is offline for an extended period of time, and unplug the power cord;
6. It is prohibited to come in contact with electronic areas with hands or other tools when the machine is
connected to power supply;
7. Touching any moving parts and laser module while the machine is running is prohibited;
8. Before engraving, place a flat object that cannot be penetrated by the laser, such as an aluminum alloy
or stainless steel plate on the workbench, and then place processing material.
9. Wear goggles to prevent vision damage arising from exposure to the laser spot during laser engraving
operation;
10. It is advisable to run the machine under well ventilated condition as laser engraving may generate small
amount of fume or gas;
11. Children under 10 years old are not allowed to run the machine without adult presence, which otherwise
may lead to personal injury;
12. Put in place fire extinguishers in case of use, which shall be regularly checked. It is prohibited to keep
the machine unattended while it is running
；
13. Users should comply with the laws and regulations of the corresponding countries and regions where
the equipment is located (used), abide by professional ethics, pay attention to safety obligations, and strictly
prohibit the use of our products or equipment for any illegal purposes. Creality will not be responsible for any
violators' legal liability under any circustance.
Model
Machine size
Net weight
Operation system
Input
Output
Range of operating temperature
Safety certification
Engraving size
Laser source
Laser wave length
Laser power
Safety class
Laser engraving software
Format files
Type of supporting materials
产品型号
产品尺寸
产品净量
操作系统
输入电压
输出电压
工作温度范围
安规认证
雕刻尺寸
激光源
激光波长
光功率
安全等级
激光雕刻软件
文件格式
支持材料类型
CR-Laser Falcon
568*632*198mm
3.2kg
Windows /MacOS
100-240V~ 50-60Hz
DC 24.0V 3.0A
0℃-35℃
IEC60825、FDA、CE、ROHS、FCC、UKCA、UL 报告、PSE
400mm*415mm
半导体激光器 /Semiconductor laser unit
455±5nm
5W/10W
Class I（FDA 分类标准 /FDA classification standard)
LaserGRBL、LightBurn
jpeg、jpg、png、bmp、svg、dxf
纸板、木板、竹板、橡胶板、皮革、织物、亚克力、漆面金属、塑料等
Cardboard, wood, bamboo, rubber, leather, fabric, acrylic,
plastic, etc
产品参数
Parameters