background image

开始雕刻 

Start Engraving

 离线工作 Offline working

Insert the TF card with .gcode file(The machine reads the latest .gcode file in TF card by default. It is 

recommended to delete other .gcode files before engraving) into the machine before powering on, insert one side 

of the power adapter into the power socket that can be remotely switched on, and the other side into the power 
connector on the left side of the control box .Lastly, turn on the red switch on the left side of the control box.

1. 上电前先将存有 .gcode 文件(机器默认读取 TF 卡中最新的 .gcode 文件,建议雕刻前把其它 .gcode 文件删除)的 TF 卡插

入机器中,然后将配套的电源适配器一侧插入可远程开关的电源插座中,另一侧插入控制盒左侧电源接口。最后打开控制盒左侧的红
色电源开关。

机器支持 Type-C 实时工作和通过 TF 卡离线工作。无论您采用何种方式,

雕刻前请按照组装说明部分正确调焦,并使用无尘布

搭配酒精擦拭激光模组的保护镜片,保证最佳雕刻效果。

The machine supports real-time working by Type-C or offline working by TF card. 

Please follow the assembly 

directions to focus correctly and wipe the protective lens of the laser module with dustless cloth and alcohol to ensure 
the best engraving effect.

When power on, the machine emits "beep, beep, beep". After the machine is initialized, it enters the 

standby mode,and the indicator light turns into breathing state.

电源接通后,机器发出“滴 ... 滴 ... 滴”三声,机器进行初始化后进入待机模式,指示灯变成呼吸灯效果。

电源开关

保护镜片
protective lens

TF卡槽

电源接口

Содержание CR-Laser Falcon





















Отзывы: