John Deere Air Reel Owner’s Manual
9
SAFETY
Make sure you are in compliance with all local regula-
tions regarding transporting equipment on public roads
and highways.
It is the responsibility of the owner to know the light-
ing and marking requirements of the local highway
authorities and to install and maintain the equipment
to provide compliance with the regulations. Add extra
lights when transporting at night or during periods of
limited visibility.
See the owner’s manual that came with your combine
and header for proper transportation.
1.
2.
3.
Keep safety decals clean and legible at all times.
Replace safety decals that are missing or have become
illegible.
Replaced parts that displayed a safety decal should
also display the current decal.
Decals that need to be replaced are to be placed back
in the original location.
Safety decals are available from your authorized dealer
or the factory.
HOW TO iNSTALL SAFETY DEcALS:
Be sure that the installation area is clean and dry.
Be sure temperature is above 50°F (10°C).
Decide on the exact position before you remove the
backing paper.
Remove the smaller portion of the split backing pa-
per.
Align the decal over the specified area and carefully
press the small portion with the exposed sticky back-
ing in place.
Slowly peel back the remaining paper and carefully
smooth the remaining portion of the decal in place.
Small air pockets can be pierced with a pin and
smoothed out using the piece of decal backing pa-
per.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
2.7 TRANSPORT SAFETY
2.10 SAFETY DEcALS
2.8 STORAGE SAFETY
2.9 ASSEMbLY SAFETY
Store the unit in an area away from human activity.
Do not permit children to play on or around the stored
machine.
See the owner’s manual that came with your combine
and header for proper storage.
1.
2.
3.
Assemble in an area with sufficient space to handle
the largest component and access to all sides of the
machine
Use only lifts, cranes and tools with sufficient capacity
for the load.
When necessary, have someone assist you.
Do not allow spectators in the working area.
Be sure to read the Maintenance Safety section.
1.
2.
3.
4.
5.
THiNK SAFETY! WORK SAFELY!