Cramaro GALOPPINO, Инструкция по эксплуатации и техническому обслуживанию

Страница: 6 / 31

GALOPPINO
USAGE AND MAINTANENCE MANUAL
Manual no.
Ed. Date Pag.
MCA1001-EN-ED05 05 12/09/14 6/31
This document is the property of CRAMARO TS s.r.l. and cannot be reproduced, even if only partially, without the written authorisation
of the company
Pag 6
F
F
The height of the front cables is automatically determined by the fixed position of the front return
pulleys, while in the rear part of the box, the cable supports must be positioned so that the cable
remains more or less at the height of the higher wire on the edges.
In this way, when the tarpaulin is completely compacted the cables both remain slightly below the
higher profile of the edges, thus becoming less subject to damage during the loading and unloading
phases of the vehicle.
After having fixed the cables in the rear hooks unravel the tarpaulin completely by supplying
current to the system and taking the motorised arc near to the rear of the box.
Spread the canvas thus assembled over the box by cautiously activating the (electric) movement until the last
arc of the tarpaulin is sent to the rear rebate ( 1 ) ( 2 )
( 1 ) Check the rotation of the FLAP so that it falls exactly in line with the rear door.
( 2 ) If instead the tarpaulin has a “STANDARD REAR TAIL“ then position the motorised arc in the rearmost
position.
Assembly Assembly
with FLAP without FLAP
Then tighten the cables by using the system
of the front stays.
Check that the tensioning of the lateral cables is equal on both of the cables.
The check is conducted operatively by activating the opening and closing
movement of the tarpaulin itself; during this first test check that the
pulling cables do not slip on the central pulleys of the arc motor and that
these move in a uniform manner.
ATTENTION: THE CABLES MUST NOT BE TOO TIGHT AS
OTHERWISE MOVEMENT WOULD BE DIFFICULT AND THE
CABLES WOULD DETERIORATE QUICKLY.
Once the SLIDING cables of the tarpaulin have been provisionally tightened, one can
proceed with the complete assembly of the electrical system and the control unit of the tarpaulin.
TENSION ROD