English
12
To remove the battery pack from the tool, press the release
button
2
and firmly pull the battery pack out of the tool
handle. Insert it into the charger as described in the charger
section of this manual.
Fig. G
2
1
Proper Hand Position (Fig. A, H)
WARNING:
To reduce the risk of serious personal
injury,
ALWAYS
use proper hand position as shown.
WARNING:
To reduce the risk of serious personal
injury,
ALWAYS
hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the auxiliary
handle
7
, with the other hand on the body of the tool.
Fig. H
Lock-Off Button and Trigger Switch
(Fig. I–K)
Your grinder is equipped with a lock-off button
11
.
• To lock the trigger switch
10
, move the lock-off button
11
to the rear as shown in Figure I. When the lock-off
button is moved to this position, the trigger switch
is locked.
nOTE:
Always lock the trigger switch when carrying or
storing the tool to eliminate unintentional starting.
11
Fig. I
• To unlock the trigger switch, move the lock-off button
to the front. When the lock-off button is moved to this
position, the trigger switch is unlocked.
11
Fig. .J
• Pull the trigger switch
10
to turn the motor ON.
Releasing the trigger switch turns the motor OFF.
Fig. K
10
nOTE:
This tool has no provision to lock the switch in
the ON position, and should never be locked ON by any
other means.
Hold the three position auxiliary handle
7
and body of the
tool firmly to maintain control of the tool at start up and
during use and until the wheel or accessory stops rotating.
