4.
Attach 3/8” hoses
(A) with 1/4”
industrial quick-
connect plugs (B)
to the outlets
(C).
One to
four tools
can
be used at
the
same time.
5.
The “quadra-
port” can be
temporarily or
permanently
mounted at
the work site using
the three
mounting
11 - ENG
D23012
Portable “Quadraport” Control Panel
The “Quadraport” allows remote air regulation and
control closer to the work area.
To operate “Quadraport” attached:
1.
Attach 3/8” hoses (A) with 1/4” industrial quick-
connect fittings (B) to the outlets (C). One to
four tools can be used at the same time.
Note
Always use pipe sealant tape when connecting
hoses or fittings to prevent air leaks.
To operate “Quadraport” at a remote location:
CAN CAUSE SERIOUS
INJURY OR DEATH. TANK
MAY CONTAIN 175 PSI OF AIR PRESSURE.
NEVER CONNECT ACCESSORIES TO UNREGU-
LATED AIR. NEVER OPERATE TOOLS OR
ACCESSORIES ABOVE MARKED MAXIMUM
PRESSURE.
Reduce air pressure in tank
to 60 psi maximum before
removing or connecting “quadraport” and when
connecting hose to tank quick-connect coupler.
1.
Hold “quadraport” and pull quick-connect cou-
pler (D) back to release and remove as shown.
2.
Attach one end of a 1/2” hose (E) with 3/8”
quick-connect back flow safety check valve
(F)
(provided in kit) as shown. Make sure quick-
connect coupler is secure.
To prevent possible injury,
ALWAYS use back flow
safety check valve included with unit to
connect “quadraport” to hose for use at a
remote location. If replacement back flow
safety check valve is needed refer to the
Parts Manual.
Note
Always use pipe sealant tape when
connecting hoses or fittings to prevent air
leaks.
3.
Attach the other end of the 1/2” hose (E) with
3/8” universal quick connect body (G) to the
“quadraport” as shown.
NOTE:
As shown below
to assemble 3/8” universal quick connect
body to
hose.
B
C
A
D
D
E
3/8" Universal
quick connect body
Connector
Hose
3/8" Universal
quick connect body
Hose
OR
G
Operates
attached...
or at a
remote location
F
F
B
C
A
