background image

64857

Visit our website at: http://www.harborfreight.com

email our technical support at: [email protected]

Owner’s Manual & Safety Instructions

Save This Manual

 

Keep this manual for the safety warnings and precautions, assembly, 

operating, inspection, maintenance and cleaning procedures�  Write the product’s serial number in the 
back of the manual near the assembly diagram (or month and year of purchase if product has no number)� 
Keep this manual and the receipt in a safe and dry place for future reference� 

18j

 

When unpacking, make sure that the product is intact 

and undamaged�  If any parts are missing or broken, 

please call 1-888-866-5797 as soon as possible�

Copyright

©

 2018 by Harbor Freight Tools

®

�  All rights reserved�  

No portion of this manual or any artwork contained herein may be reproduced in 

any shape or form without the express written consent of Harbor Freight Tools�  

Diagrams within this manual may not be drawn proportionally�  Due to continuing 

improvements, actual product may differ slightly from the product described herein�  

Tools required for assembly and service may not be included�

Read this material before using this product�
Failure to do so can result in serious injury�
SAVE THIS MANUAL�

Summary of Contents for 64857





















Reviews: