manualshive.com logo in svg
background image

LEHR

 | 

ALL RIGHTS RESERVED 2008-2009

21

The limited warranty set forth below is given by LEHR with respect to new merchan-

dise purchased and used in the United States and Canada, its possessions and 

territories.

LEHR warrants to the original purchaser that each new  LEHR brand power tool or 

attachment is free from defects in material and workmanship and agrees to repair or 

replace under this warranty any defective power product or attachment as follows 

from the original date of purchase.

3 YEARS

-- Parts and Labor, on carburetor.

2 YEARS

 -- Parts and Labor, when used for household purposes.

90 DAYS

 -- Parts and Labor, when used for commercial, professional, or income 

producing purposes.

30 DAYS

 -- Parts and Labor, if used for rental purposes.

This warranty is not transferable and does not cover damage or liability caused by 

improper handling, improper maintenance, or the use of accessories and/or attach-

ments not specifically recommended by LEHR for this product. In addition, it does not 

cover any product that has been subject to misuse, neglect, negligence, or accident, 

or has been operated in any way contrary to the operating instructions specified in 

this operator’s manual. Additionally, this warranty does not cover tune-ups, spark 

plugs, carburetor adjustments, filters, cutting line, bump knobs, outer spools, inner 

reels, starter pulley, or rotating head parts that will wear and require replacement with 

reasonable use during the warranty period. This warranty does not cover pre delivery 

setup or normal adjustments explained in the instruction manual.

THIS WARRA NTY  GIVES YOU SP ECIFIC L EG AL RIGHTS, A ND YOU MAY  HAVE 

OTHER RI GHTS W HICH VARY FROM STAT E TO STAT E.

NO CLAIMS FOR CO NS EQUENTIAL OR OT HER  DAMAGE S WILL B E ALLOW ED, 

AND THERE AR E NO OT HER  EXPR ESS WARRA NTIES  EXCEPT T HOS E EXPR ESSLY 

STIPULAT ED HEREIN. SOM E STAT ES  DO NOT ALLOW LIMITATIO NS O N HOW 

LONG AN IMPLIED WARRA NTY LASTS OR T HE EXCLUSIO N OR LIMITATIO NS OF 

INCIDENTAL OR CO NS EQUENTIAL DAMAGE S, SO T HE ABO VE LIMITATIONS OR 

EXCLUSIO N MAY  NOT APPLY TO YOU.

LEHR does not extend any warranty for products sold or exported outside of the 

United States or Canada, its possessions and territories, except those sold through 

LEHR’s authorized channels of export distribution.  The policy of LEHR is to continu-

ously improve its products. Therefore, LEHR reserves the right to change, modify, or 

discontinue models, designs, specifications, and accessories of all products at any 

time without notice or obligation to any purchaser.

HOW TO OBTAI N S ERVICE:  Warranty service is available, with proof of purchase 

through your local authorized service dealer.  To locate the dealer in your area, visit our 

website at 

www.golehr.com

 or call 

1-866-941-LEHR 

or write to 

8922 Ellis Ave. LA, CA 90034. 

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The California Air Resources Board, the  Environmental Protection Agency and LEHR, 

Inc. are pleased to explain the emissions control system’s warranty on your 2009 and 

later small off-road engine.  In California and the 49 states, new equipment that use 

small off-road engines must be designed, built, and equipped to meet the State’s 

stringent anti-smog standards.  LEHR, Inc. must warrant the emissions control system 

on your small off-road engine for the period listed below provided there has been no 

abuse, neglect or improper maintenance of your equipment.  Your emissions control 

system may include parts such as: carburetors or fuel injection system, ignition 

system, catalytic converters, fuel tanks, valves, filters, clamps, connectors, and other 

associated components.  Also, included may be hoses, belts, connectors, sensors, 

and other emission-related assemblies.  Where a warrantable condition exists, L EHR 

will repair your small off-road engine at no cost to you including diagnosis, parts and 

labor at an authorized service dealer.

MANUFACTURER’S WARRANTY COVERAGE:

This emissions control system is warranted for two years.  If any emissions-related 

part on your equipment is defective, the part will be repaired or replaced by LEHR.

OWNER’S WARRANTY RESPONSIBILITIES:

As the small off-road engine owner, you are responsible for performance of the re-

quired maintenance listed in your owner’s manual.  LEHR recommends that you retain 

all receipts covering maintenance on your small off-road engine, but LEHR cannot 

deny warranty solely for the lack of receipts or your failure to 

ensure the performance of all scheduled maintenance.  As the small off-road engine 

owner, you should however be aware that LEHR may deny you warranty coverage 

if your small off-road engine or a part has failed due to abuse, neglect, or improper 

maintenance or unapproved modifications.

You are responsible for presenting your small off-road engine to a LEHR service 

center as soon as the problem exists.  The warranty repairs should be completed in a 

reasonable amount of time, not to exceed 30 days.  If you have a question regarding 

your warranty coverage, you should contact LEHR at 1-866-941-L EHR.

DEFECTS WARRANTY REQUIREMENTS:

(a) 

The warranty period begins on the date the engine or equipment is delivered to an 

ultimate purchaser.

(b

) General Emissions Warranty Coverage.  The manufacturer of each small off-road 

engine or equipment must warrant to the ultimate purchaser and each subsequent 

owner that the engine or equipment is:

Designed, built, and equipped so as to conform with all applicable regulations 

adopted by the Air Resources Board; and free from defects in materials and work -

manship that causes the failure of a warranted part for a period of two years.

(c) 

The warranty on emissions-related parts will be interpreted  as follows:

Any warranted part that is not scheduled for replacement as required maintenance in 

the written instructions required by Subsection 

(d) Must be warranted for the warranty period defined in Subsection (b)(2).  If any such 

part fails during the period of warranty coverage, it must be repaired or replaced 

by the manufacturer according to Subsection (4) below.  Any such part repaired or 

replaced under the warranty must be warranted for the remaining warranty period.

Any warranted part that is scheduled only for regular inspection in the written instruc

-

tions required by Subsection (d) must be warranted for the warranty period defined 

in Subsection (b)(2).  A statement in such written instructions to the effect of “repair 

or replace as necessary” will not reduce the period of warranty coverage.  Any 

such part repaired or replaced under warranty must be warranted for the remaining 

warranty period.

Any warranted part that is scheduled for replacement as required maintenance in the 

written instructions required by Subsection (d) must be warranted for the period of 

time prior to the first scheduled replacement point for that part.  If the part fails prior 

to the first scheduled replacement, the part must be repaired or replaced by the 

engine manufacturer according to Subsection (4) below.

Section 4:  Any such part repaired or replaced under warranty must be warranted for 

the remainder of the period prior to the first scheduled replacement point for the 

part.  Repair or replacement of any warranted part under the warranty must be 

performed at no charge to the owner at a warranty station.

Notwithstanding the provisions of Subsection (4) above, warranty services or repairs 

must be provided at all manufacturer distribution centers that are franchised to 

service the subject engines.

The owner must not be charged for diagnostic labor that leads to the determination 

that a warranted part is in fact defective, provided that such diagnostic work is 

performed at a warranty station.

The manufacturer is liable for damages to other engine components proximately 

caused by a failure under warranty of any warranted part.

Throughout the emissions warranty period defined in Subsection (b)(2), the manu-

facturer must maintain a supply of warranted parts sufficient to meet the expected 

demand for such parts.

Any replacement part may be used in the performance of any warranty maintenance 

or repairs and must be provided without charge to the owner.  Such use will not 

reduce the warranty obligations of the manufacturer.

Add-on or modified parts that are not exempted by the Air Resources Board may not 

be used.  The use of any non-exempted add-on or modified parts will be grounds 

for disallowing a warranty claim.  The manufacturer will not be liable to warrant 

failures of warranted parts caused by the use of a non-exempted add-on or modi -

fied part.

The manufacturer issuing the warranty shall provide any documents that describe that 

manufacturer’s warranty procedures or policies within five working days of request 

by the Air Resources Board.

(d) 

Emission Warranty Parts List.

The following components are included in the emission related warranty of the engine: 

Air Filter, Carburetor, Regulator, Fuel Lines & Fittings, Fuel Valve, Ignition Coil, Spark 

Plug, Valves, CAM and Muffler.

LEHR will furnish with each new engine written instructions for the maintenance and 

use of the engine by the owner.

MANUFACTURER’S LIMITED WARRANTY

Содержание 25cc - Propane Curved Shaft Trimmer Powered by Lehr























Отзывы: