9. LED Light Kit Assembly.
Remove 1 screw from motor plate on underside of
motor housing and partially loosen the other 2
screws.
Connect
WHITE
wire from motor housing to
WHITE
wire from LED light kit and
BLUE
(or
BLACK
)
wire from motor housing to
BLACK
wire
from LED light kit. Make sure molex connections
snap together completely.
Align slotted holes in LED light kit with loosened
screws in motor plate. Twist LED light kit to lock.
Re-insert screw that was previously removed and
securely tighten all 3 screws with a Phillips
screwdriver.
Align grooves on shade with nodules on inside of
LED light kit and push up gently on shade. Twist
shade to the RIGHT (clockwise) until shade locks
into place.
Pull down VERY GENTLY on shade to make sure that
shade is secure.
page 9
LED light kit
shade
motor
housing
motor plate
molex
connections
