page 8
9. Automated Learning Process./Activating Code.
Install battery (provided) in transmitter and wall control (if applicable).
IMPORTANT
: Store the transmitter away from excess heat or humidity. To prevent damage to transmitter,
remove the battery if not used for long periods.
LED LIGHT:
Comes on when any button is pressed.
FAN
SPEED,
Buttons
1-6
:
Use to control the ceiling fan speed 1-6.
REVERSE
:
Use to control fan direction.
LEARN
button
:
Turn fan power on. Within 30 seconds of powering fan,
press and hold
LEARN
button on remote control and/or wall
control for 5 seconds (or until fan beeps twice) in order to
synchronize remotes with fan motor.
UP-LIGHT
:
Use for up-light (if applicable), or dimmer.
LIGHT KIT
: Use for light kit (if applicable), or dimmer.
FAN OFF:
Use to turn fan off.
ON
/
OFF
slider switch:
[
Wall control only
] Use to turn wall control on or off.
Select faceplate for remote control and/or wall control and press firmly onto front of remote control/wall
control.
IMPORTANT
:
The Automated Learning Process takes 5 minutes to complete. Please leave the fan “on”
for the duration of the 5-minute programming and do not use the remote control
during this time.
CAUTION
: “DO NOT DISPOSE OF BATTERIES IN FIRE, BATTERIES MAY EXPLODE OR LEAK.” - When disposing of
household alkaline batteries, it is best to check with your local and state recycling or household hazardous waste
coordinators concerning the specifics of the program in your area. You may also locate a recycling center by calling
1-800-8-BATTERY or 1-877-2-RECYCLE or visit www.epa.gov/epawaste/index.htm or www.earth911.org for more
information.
REMOTE
CONTROL
12V
LIGHT KIT
FAN OFF
REVERSE
1
2
3 4
5
6
1
2
3
4
5
6
LEARN
WALL
CONTROL
IMPORTANT:
Remote and wall
controls must be
SYNC R ONI ED with
fan in order to
properly function.
LIGHT KIT
FAN OFF
REVERSE
ON/OFF
SLIDER
SWITCH
LEARN
FAN SPEED
FAN SPEED
LED LIGHT
LED LIGHT
12V
LEARN
LEARN
UP LIGHT
UP LIGHT
