page 6
7. Fan Assembly.
Remove motor assembly from j-hook on hanging
bracket. Lift motor assembly to hanging bracket
and carefully push wiring and wire connectors
into outlet box. Align holes in top of motor
assembly with bolts in hanging bracket and push
up so that bolts come through holes. Secure
motor assembly with flat washers and motor
mounting nuts that were previously removed
(
refer to page 4, Section 4
).
WARNING
: It is extremely important to tighten
motor mounting nuts completely so that fan is
mounted securely.
hanging
bracket
motor
mounting
nuts and flat
washers
motor assembly
motor
mounting
nuts and
flat washers
j-hook
8. Motor Housing Assembly.
Temporarily raise motor housing to
hanging bracket to determine which 2
screws in hanging bracket align with
slotted holes on top rim of motor housing.
Partially loosen
the 2 screws in the hanging
bracket that correspond to
slotted
holes in
the motor housing.
Remove
the
other
2
screws from the hanging bracket.
Now, raise motor housing to hanging
bracket again, allowing slotted holes in
motor housing to align with loosened
screws in hanging bracket. Twist motor
housing to lock. Re-insert the 2 screws that
were previously removed and then tighten
all screws to secure motor housing.
motor
housing
screws
motor
housing
screws
motor
housing
hanging
bracket
