13. Testing Your Fan.
It is recommended that you test fan before
finalizing installation. Restore power from circuit
box and light switch (if applicable). Test wall
control (optional installation) by locating ON/OFF
slider switch on wall control, then set to the ON
position. Test the light ON/OFF and dimmer
function with L button and then test fan speeds.
Next, locate handheld remote control. Test the
light ON/OFF function by pressing the L button;
test the dimmer function by pressing the
L button and holding it down for up to 5 seconds.
Test fan speeds with the different fan speed
buttons. If the wall and/or handheld remote
control operates all of the functions of the fan
and light, battery/batteries has/have been
installed correctly. If the wall and/or handheld
remote control do (does) not operate all of the
fan/light functions, refer to "Troubleshooting"
section to solve any issues before contacting
Customer Service.
Turn fan completely off before moving the reverse
switch (located on top of motor housing). Set
reverse switch to recirculate air depending on the
season:
- LEFT position in summer (diagram 1)
- RIGHT position in winter (diagram 2)
A ceiling fan will allow you to raise your
thermostat setting in summer and lower your
thermostat setting in winter without feeling a
difference in your comfort.
Important: Reverse switch must be set either
completely LEFT or completely RIGHT for fan to
function. If the reverse switch is set in the middle
position (diagram 3), fan will not operate.
NOTE: If the wall control/handheld remote
control interfere(s) with other appliances, turn
power off first and then go back to the
instructions in Section 11 (page 10).
page 11
12. Remote/Wall Control Operation.
ON/OFF slider switch - turns wall control ON or OFF
(switch not functional on
handheld remote)
HIGH button - turns fan to HIGH speed
MED button - turns fan to MEDIUM speed
LOW button - turns fan to LOW speed
OFF button - turns fan OFF
L button - turns light kit ON/OFF when pressed once;
dims light kit when pressed and held
down.
wall control
handheld
remote control
motor
housing
reverse
switch
diagram 1
diagram 2
diagram 3
