7
Step 7
For added security, attach safety cable from fan unit to "J" hook (S7) in
outlet box. Secure by looping zip tie (S8) through safety cable and "J" hook.
Tighten zip tie securely. Lift fan onto the mounting bracket (#1). Turn
housing until hanging ball seats itself into ball socket (listen for click).
NOTE
: Parts furnished will allow
you to install your fan at up to a 35
°
angle. Angles greater than 35
°
will
require a 45
°
angle adapter (see
dealer).
NOTE
: J Hook installation is a
Canadian requirement only.
Outlet Box (A)
Support Beam
Ceiling
Green Ground Wire
“J” Hook (S7)
OUTLET BOX
“J” Hook (S7)
Safety Cable
Zip Tie (S8)
Mounting Bracket (#1)
WARNING:
To reduce the risk of fire, electric shock or personal injury, mount
so outlet box marked "acceptable for fan support" and use mounting screws
provided with the outlet box. Most outlet boxes commonly used for the support
of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
Step 6
Position downrod so the hole in the downrod aligns with the hole in the
coupling on the motor. Insert safety bolt (S6) through coupling and downrod
and attach nut. Tighten firmly. Tighten set screw "A" against downrod.
Place top motor housing (4) over downrod assembly. Place canopy (3) over
downrod (2). Attach black antenna wire plug from top motor housing to
black antenna wire plug on motor housing. Next attach the blue and white
plug wires from top motor housing to the blue and white plug from the
motor housing. Make sure connections are fully snapped together. Replace
hanging ball, insert hanging pin through downrod and tighten set screw
"C" in hanging ball into downrod.
6
WARNING:
Failure to completely tighten downrod as described in steps 5 &
6 above could result in the fan loosening and possibly falling.
IMPORTANT:
Black antenna wire must be connected for fan to function.
Set Screw (C)
Black Antenna Wire
Blue & White Wires
Safety Bolt & Nut (S6)
Set Screw (A)
Canopy (3)
Downrod (2)
Fan Motor Housing (5)
Top Motor Housing (4)
Ground
Wire
Ball
Screw
Hanging
Pin
Hanging
Ball
Threaded
Set Screw Hole
