page 6
6. Fan Assembly (flushmount). (cont)
If there are only
3
screws in top of motor housing,
please proceed to next paragraph. If there are
6
screws in top of motor housing, remove every other
screw and star washer.
Remove pin, clip and set screws from motor housing
yoke. Thread wiring through canopy ring and
canopy. Place canopy over yoke aligning larger holes
in canopy with the 3 existing screws in top of motor
housing. Insert the 3 screws and 3 star washers that
were removed (if there were only 3 screws located in
top of motor housing, these screws/star washers will
be located in one of the hardware packs) into the
remaining holes. Securely tighten these screws.
To prepare the fan for wiring, hang fan onto hanging
bracket by sliding the canopy over the hanging
bracket tab. (Use one of the non-slotted holes on the
rim of the canopy to do so.)
canopy
hanging bracket
tab
7. Wiring.
CAUTION
:
Be sure outlet box is properly grounded
and that a ground wire (
GREEN
or Bare) is present.
Make sure all electrical connections comply with
Local Codes or Ordinances and the National
Electrical Code. If you are unfamiliar with electrical
wiring or if the house/building wires are different
colors than those referred to below, please use a
qualified electrician.
Note:
Excess lead wire length from the fan can be cut
to the desired length and then stripped.
When downrod is secured in place on the hanging
bracket, electrical wiring can be made as follows:
Connect
BLACK
and
BLUE
wire from fan to
BLACK
wire from ceiling with wire connector provided.
Connect
WHITE
wire from fan to
WHITE
wire from
ceiling with wire connector provided.
Connect all
GROUND
(
GREEN
) wires together
from fan to
BARE
/
GREEN
wire from ceiling with
wire connector provided.
If you intend to control the fan light with a
separate light switch, connect
BLUE
wire from fan
to the
BLACK
(or
RED
) supply from the
independent switch.
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
wire
connectors
wire
connector
This fan is remote control adaptable (remote
control sold separately).
black
black
white
white
blue
black supply wire
ground
(green
or bare)
white supply wire
from ceiling
from fan
ground
(green or bare)
*
motor
housing
motor housing
canopy
yoke
pin
clip
set screw