Craftex CX208, Руководство пользователя

Страница: 8 / 31

8
PROPER GROUNDING
Grounding provides a path of least
resistance for electric current to reduce the
risk of electric shock.
CX208 is equipped with a 220-V single
phase motor and provided with a power
supply cord that is to be connected directly
to the source. See figure-1.
Make sure that the machine is connected to
an outlet having the same configuration. If
an adaptor plug is used, it must be attached
to the metal screw of the receptacle. To
prevent electrical hazards, have a qualified
electrician ensure that the line is properly
wired.
Figure-1 220-Volts Outlet for CX208
It is strongly recommended not to use
extension cords with your CX208. Always
try to position your machine close to the
power source so that you do not need to
use extension cords.
When it is necessary to use an extension
cord, make sure the extension cord does
not exceed 50-feet in length and the cord is
12-gauge to prevent motor damage.
Your CX208 should be wired with a plug
having 3-prongs to fit a 3 prong grounded
receptacle as shown in figure-1.
Do not remove the grounding prong to fit it
into a 2-pronged outlet. Always check with
a qualified electrician if you are in doubt.
WARNING!
Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. Check with a qualified
electrician if you are in doubt as to
whether the outlet is properly grounded.