Craftex CX208, Руководство пользователя

Страница: 7 / 31

7
SETUP
Before setting up your machine you should
read and understand the instructions given
in this manual.
The unpainted surfaces of this table saw
are coated with rust prevention waxy oil and
you will want to remove this before you
begin assembly. Use a solvent cleaner that
will not damage painted surfaces.
UNPACKING
The machine is properly packaged and
shipped completely in a crate for safe
transportation. When unpacking, carefully
inspect the crate and ensure that nothing
has been damaged during transit. Open the
crate and check that the machine is in a
good condition.
LIST OF CONTENTS
A. Table Saw ........................................ 1
B. Table Extensions ............................. 2
C. Cabinet Door.................................... 1
D. Rip Fence ........................................ 1
E. Front & Rear Rails ........................... 2
F. Blade................................................ 1
G. Miter Gauge ..................................... 1
H. Blade Guard..................................... 1
I. Push Stick ........................................ 1
J. Lock Knob ........................................ 1
K. Hand-wheel...................................... 2
L. Table Insert ...................................... 1
M. Extension Table .............................. 1
N. Arbor Wrench................................... 1
O. Anti Kickback Pawl........................... 1
P. Hardware Bag .................................. 1
WARNING!
CX208 is a very heavy machine, do not
over-exert yourself. For safe moving
method use fork truck or get the help of
an assistant or friend.