Craftex CX208, Руководство пользователя

Страница: 14 / 31

14
TEST RUN
Once you have assembled your machine
completely, it is then time for a test run to
make sure that the machine works properly
and is ready for operation.
During the test run if there is any unusual
noise coming from the machine or the
machine vibrates excessively, stop the
machine immediately and disconnect from
the power source and investigate to find out
the problem with your machine.
During the test run you should make sure
that the machine operates properly when
turned ON. Check all the safety features on
the machine and make sure all the safety
features work properly.
BLADE GUARD
The blade guard assembly on your CX208
consists of a clear polycarbonate shield,
spreader and anti-kickback pawls.
The clear polycarbonate guard allows the
operator to see the blade cutting the work-
piece during cutting operation. The guard
covers the blade on both sides and lifts up
as the work-piece is fed into the blade and
returns to the table surface when the work-
piece has passed through the blade. It
prevents the wood chips to fly and injure
the operator and it also prevents from
accidental contacts of objects with the
blade.
At the back side of the guard there is a
metal plate called a spreader. The spreader
prevents the kerf of the work-piece from
pinching the blade and causing kick back.
The kick back pawls are designed such that
they allow the work-piece to move only
forward. During the cutting operation if the
work-piece moves backward, the anti kick
back pawls will dig into it and stop it.
Figure-16 Blade guard assembly
WARNING!
Before starting the table saw, make sure
that you have read and understood the
manual and you are familiar with the
functions and safety features on this
machine. Failure to do so may cause
serious personal injury.
WARNING!
The safety instructions given in this
manual can not be complete because the
environment in every shop is different.
Always consider safety first as it applies
to your individual working conditions.