Craftex CX116, Руководство пользователя

Страница: 9 / 23

9
CABINET, WHEELS
AND FEET
The CX116 comes with two rubber feet and
two wheels. The rubber feet and the wheels
are installed to the cabinet allowing for easy
moving around the shop.
To install the wheels, feet and the cabinet:
Insert the axle into the axle holes at the end
of the base.
Slide the washer and wheels onto each end
of the axle.
Slide another washer and thread the hex
nuts on both ends of the axle to secure the
wheels to the axle.
Figure-2 Installing the wheels
Thread the two rubber feet into the base.
See figure-3.
Figure-3 Installing the rubber feet
Now position the base on the floor and
adjust the feet until the base is stable on
the floor.
Tighten the hex nuts against the base to
lock the rubber feet.
Position the front and rear panels on the
base and secure the panels to the base
with four screws and washers provided.
Position the left panel between the front
and rear panels and secure it using screws
and washers provided.
Install the right panel in the same manner.
Align the holes on the band saw with the
holes on the stand and secure it using hex
bolts and flat washers provided.
Figure-4 Securing band saw on the cabinet
WARNING!
CX116 is a heavy machine. Do not
overexert yourself. Get the help of a
friend lifting the band saw on the cabinet.