Craftex CT170, Руководство пользователя

Страница: 10 / 16

10
Figure-7 Adjusting the belt tracking
Once the belt is in the center of the rollers,
stop turning the adjustment knob and the
disc.
Reinstall the side cover and connect the
cord to the power source.
Turn the sander ON and then quickly OFF
and watch if the belt is riding true in the
center of the rollers.
UPPER GUARD
Install the upper bracket to the belt sanding
arm and secure it with the lock knob as
shown in figure-8.
Figure-8 Installing the upper guard
MOUNTING
The CT170 is provided with 4 pre-drilled
holes on its base to allow mounting on a
workbench.
To mount the sander on a workbench:
Remove the rubber feet in the holes and
place the machine on the workbench and
use a pencil marking on the bench surface
through the 4 holes on the base of the
machine.
Remove the machine and drill the 4 holes
on the marked points using a proper size
drill bit.
Position the machine on the table with the
holes on the base aligned with the holes on
the workbench.
Use bolts (not provided) that exceed the
thickness of the base plus the thickness of
the bench top and secure the machine to
the workbench.
Figure-9 Mounting holes