21
7.2.
LOADING THE FILAMENT
•
Heat up the printer.
•
Take the end of the filament out of the securing hole on the Filament spool.
•
Cut and the end of the filament so the filament is straight and has no damages
bends kinks or melted parts.
•
Remove the filament guide tube from the insert hole on the top of the extruder.
•
Insert the end of the filament from the spool UP into the filament guide tube
holder, then into the filament guide tube. Until it comes out of the guide tube at
the extruder end.
•
Push the filament into the top of extruder hole.
7.3.
EXTRUDE MENU
7.3.1.
Extrude
Select the Extrude menu
on the Home screen.
•
Before extruding, make sure the head is near the build plate, not
pressed into the plate or directly above.
•
To print filaments from the print head, use the down arrow
on
the touch screen. Press and hold the button to keep the filament
pressed out of the head.
•
Automatic filament feed can also be performed by pressing the Load
button
on the bottom bar. By pressing the button once,
the head automatically extrude some filaments.
•
Filament loading is successful when the melted filament flows out of
Содержание CB4 FLOW Series
Страница 1: ...V 1 0 2020 01 22...
Страница 41: ...41...
