CraftBot CB4 FLOW Series, Руководство пользователя

Страница: 6 / 41

6
2. IMPORTANT
Read this user manual carefully before you use the appliance, then save it for
future reference. All information in this user manual is subject to change at any time
without notice and is provided for convenience purposes only. CraftUnique, reserves
the right to modify or revise this user manual in its sole discretion and at any time. By
using the manual, you agree to be bound by any modification and/or revisions. For
up-to-date information contact the CraftUnique Service Support team.
(
support@craftunique.com ).
2.1. WARNINGS
•
Check if the voltage indicated on the bottom of the appliance corresponds to the
local mains voltage before you connect the appliance.
•
Do not immerse cord, plug or main body in water or any other liquid. This may
cause electrical
•
shock.
•
Do not use the appliance if the plug, the mains cord or the appliance itself is
damaged or not operating properly.
• If the mains cord is damaged, you must have it replaced in order to avoid hazard.
•
Only connect the appliance to grounded wall sockets.
•
Keep the mains cord away from hot surfaces.
•
Do not let the mains cord hang over the edge of the table or worktop on which the
appliance stands.
•
Keep the appliance and its cord out of the reach of children.
•
This appliance can be used by children aged from 8 years and above; and by
persons with reduced physical, sensory or mental capabilities or a lack of
experience and knowledge. These persons should be under supervision and given
adequate instruction concerning the use of the appliance in a safe way,
understanding the hazards involved. Cleaning and user maintenance shall not be
made by children.
•
Children can receive great educational benefits from designing 3D objects, but the
printing process should not be done by small children.
•
Do not touch moving parts or heated elements, it can cause injuries.
•
Never reach inside the machine when turned on. Different parts of the machine
(mainly the extruder and heated build plate) operate at very high temperatures and