CraftBot CB4 FLOW Series, Руководство пользователя

Страница: 16 / 41

16
•
Inverted head: It swaps the 2 heads while printing ergo a part what should be printed
with the first head it will be printed with the second head and vice versa. You do not
have to replace the two filaments at the beginning of the print if they are swapped in
the two heads
• Backup: It can be used when you print with 1 head. While printing, if the first head
jams, the second head will continue automatically thus the print won’t stop. When
using this mode it is recommended to use the same filament (or at least the same
color) in both heads so there won’t be any difference on the final printed model.
6.5. CALIBRATION SETTINGS
CraftBot has a leveling procedure which ensures that the extruder and the
heated build plate are at optimal distance and they must be leveled evenly. Smaller
gap or uneven levelling may lead to the damaging of the Kapton cover of the build
plate or the extruder.
Select the Settings menu on the LCD screen and touch the Calibrate icon.
•
There are several calibrations to choose from on the new screen. Drag the tabs to
the right next to the calibrations you want to run and launch them using the button
below.
There are 4 type of calibration:
•
Manual bed
•
Mesh bed
•
Extruder
•
Offset
•
For a successful calibration and printing, it is essential to start with Offset
calibration. This is a continuously defined Z, X and Y dimensions.
•
After all calibration options are started at the same time, the printer automatically
starts with Offset calibration, proceeds to Manual bed, Mesh bed calibration, and
then completes the full calibration with Extruder calibration.