CraftBot CB4 FLOW Series, Руководство пользователя

Страница: 19 / 41

19
•
There are a few important rules to follow before calibrating!
!
Heat up the nozzle and remove the filament from the extruder.
!
Clean the plate and the nozzle tip.
!
Make sure the metal plate is pushed back as far as it will go.
•
Extruder calibration
•
Both calibrations are performed by the printer without external intervention or
adjustment.
•
There are a few important rules to follow before calibrating!
!
Heat up the nozzle and fill the filament into the extruder.
!
Clean the plate and the nozzle tip.
!
Make sure the metal plate is pushed back as far as it will go.
6.6. FW UPGRADE MENU
•
Download the latest frilmware file at https://craftbot.com/firmware and upload
it to the root folder of a flash drive without unpacking.
•
Select the Settings menu on the LCD screen and touch the Upgrade
icon.
• In the upper right corner of the home screen, the flash drive will be whitened
and the flash drive will be detected. Wait for the flash drive to be detected.
• At the bottom of the screen, press the rescan button
and select UPDATE FROM PENDRIVE on the screen.
• Wait for the 10-part update to complete. Then,
when the update is complete, press OK in the pop-up
confirmation message.
• Wait 10 seconds after the upgrade. Do not turn off
the machine completely!