Crafco MODEL 30 PAVEMENT ROUTER, Инструкция по эксплуатации и запасным частям

Страница: 15 / 63

15
OPERATING PROCEDURE (Continued)
MODEL 30 PAVEMENT ROUTER
NOTE: ATTACHING CUTTER HEAD DUST SHROUD CONTINUED
3. Use the Brush Manipulation Tool to push the Seal Brushes on both sides of shroud up
above the cutter housing. The brushes should be in an upward position. (Figure 2)
Figure 2
4. Lower the router back onto its wheels.
5. Make sure the large particle dust collection bin is empty and is securely attached to
mounting bracket before beginning your routing operation.
6. Make sure the dust collection bag is clean and securely clamped to filter mounting
bracket with adjustable quick release gear clamp. The quick release gear clamp
is adjustable and should be adjusted so that it holds the dust collection bag securely in
place. Do not over-tighten the clamp as this may damage the dust collection bag. The
support rod was designed so it could be slid into a rearward position for transportation
of router where space is limited. The support rod should be fully extended in its forward
position before routing begins.
7. Raise the cutter mechanism by pushing the rocker switch to the up position.
8. Open fuel valve on bottom of fuel tank.
NOTE: ATTACHING CUTTER HEAD DUST SHROUD COMPLETED