Crafco E-Z 50, Инструкция по эксплуатации и запасным частям

Страница: 23 / 37

E-Z 50 Melter Part Manual
Maintenance Instructions Chapter 6
©2017 by Crafco, Inc. All Rights Reserved…………………...………………………..……………Maintenance Instructions 6-3
6.8 Service Instructions
Table 6-2 Service Instructions
Step Action
1 Do a general inspection of your machine at least once a week
2
Replace all worn or damaged parts
Note: Keep regular replacement parts in stock for emergency repairs to prevent
costly downtime.
3 Make any necessary adjustments and tighten all loose nuts or screws
4 Watch for leaks. Tighten fittings or repair as necessary.
5
Clean the external surfaces of the machine at regular intervals.
Note: Refer to the sealant manufacturer’s instructions for recommendations.
6
Follow the recommended maintenance per
Table 6-1 Maintenance Chart
6.9 Recommended Fluids and Lubricants
Table 6-3 Recommended Fluids and Lubricants
Application Recommended Full Point
Engine Oil Refer to engine manual 20 fl. oz.
Hydraulic Oil Shell AW Hydraulic 46 2 Gal.
Heat Transfer Oil Shell Turbo T 68 (Group II) 18 Gal.
Propane Vapor Draw 100lb.